Contact us

Trac-DA034LC Video Tracking Board for Vision System Integration

0 AI Intelligent Module 645℃


AI Intelligent Module · Product guide

The Trac-DA034LC is a compact vision processing board for integrators who need camera video analysed and passed on within a single device. It accepts SDI or CVBS input, returns video on both formats, and performs AI-assisted target tracking. Gigabit Ethernet with RTSP streaming plus RS422 and TTL serial ports make it a practical fit for fixed security, surveillance and industrial monitoring systems.

Verified specifications

Specifications from the current product listing
Video Input 1 × SDI, 1 × CVBS
Video Output 1 × SDI, 1 × CVBS
Serial Ports RS422, TTL
Network Gigabit Ethernet with RTSP streaming
Memory 8GB / 16GB
Power Consumption < 4W
Dimensions 60mm × 45mm
Weight 30.8g ± 5g (bare board without heat sink)

Video Inputs and Outputs

The Trac-DA034LC handles two video sources and returns two video channels. Input is one SDI connection plus one CVBS channel, and the output side mirrors that pairing with one SDI and one CVBS. Practically, an existing camera or decoder can feed the board, while a downstream monitor, recorder or encoder can take the resulting picture onward.

This dual-format arrangement is the main structural difference from the DA034L base variant. Rather than committing a system to one standard, an installer can keep an SDI path for digital recording and use the CVBS output for a simpler display or a legacy capture device, depending on what the rest of the chain already accepts. Both formats are present on every board, so the choice is made at wiring time.

  • SDI input for digital camera or decoder sources.
  • CVBS input for analogue composite cameras.
  • Matching SDI and CVBS outputs for downstream viewing or recording.

Tracking and Network Streaming

Target tracking is handled on the board and is described as AI-assisted, with performance intended to hold up under interference. That matters for fixed installations where the scene contains movement, weather or other competing visual activity, because a tracker that loses the target repeatedly forces constant operator attention.

For networked use, Gigabit Ethernet carries RTSP streaming, so a live view can be pulled into a standard player or an existing video management environment. The documented interface is wired Ethernet with RTSP; no wireless radio is listed, so remote access still depends entirely on the network you provide and the routing you configure around it.

  • AI-assisted target tracking as supplied.
  • RTSP streams over wired Gigabit Ethernet.
  • No wireless interface is documented for this board.
A civilian drone tracks a moving ground vehicle through an industrial landscape using a geometric visual-tracking frame.

Civilian Monitoring Applications

Two application areas are called out for this board. Electronic sentry work suits static, unattended monitoring, where automated tracking reduces the need for a person to watch a fixed camera feed continuously. Coastal surveillance is the second named scenario, where live ship and target monitoring over the network depends on stable streaming to a control room.

Industrial monitoring fits the same pattern. Because the board accepts either digital or composite video and offers both output formats, it can be dropped into an existing camera chain without re-architecting the site. The relevant question is not whether the board can be used, but whether your cameras, displays and network path match the documented connectors.

Integration Checks and Selection Tradeoffs

Before committing to this board, work through the interface list rather than the headline features. A camera that outputs only one of the two documented formats can be connected, but a downstream device expecting the other format may need a converter. Serial commands, if used, must match the RS422 or TTL option you plan to wire.

The available memory variants also need a decision. Capacity is listed as 8GB or 16GB, but the documentation does not tie either figure to a specific function, so confirm the option against your intended configuration before ordering. At roughly 60 × 45mm and under 4W, the board fits easily into a compact enclosure, and the 30.8g ± 5g figure applies to the bare board without a heat sink.

  • Match camera output format to the SDI or CVBS input.
  • Confirm the downstream device accepts the chosen output format.
  • Decide between 8GB and 16GB memory before ordering.
  • Plan enclosure, heat sinking and connector access around a bare board.

Frequently asked questions

What video formats can the Trac-DA034LC accept and output?

Input consists of one SDI connection and one CVBS channel. Output mirrors that arrangement with one SDI and one CVBS. In practice, this lets a digital camera feed the board while a composite display takes the picture, or the reverse, without needing a separate format converter in the middle of the chain.

How is video delivered to a networked viewing system?

The board provides Gigabit Ethernet with RTSP streaming, so live video can be opened in a compatible player or video management system. This is a wired connection only; no wireless option is documented, so remote viewing still depends on the network infrastructure and routing you install around the device.

What power and space does the board require?

Power consumption is documented at under 4W, and the board measures 60mm × 45mm. The stated weight of 30.8g ± 5g applies to the bare board without a heat sink, so the installed unit will differ once you add a heat sink, enclosure, connectors and cabling.

Does the board include serial connectivity for external control?

Yes. RS422 and TTL serial ports are listed among the interfaces, which allows a host controller or peripheral to exchange control data with the vision board. Neither protocol is documented with connector type or pinout, so check the wiring details for your specific configuration before integrating.

Origin: uavauto.com
View Out Product:

Leave a Reply

Your email address will not be published. Required fields are marked *

Go to Top