The imaging system covers both wide-area observation and targeted inspection. At the wide end, its horizontal field of view reaches approximately 62 degrees. Meanwhile, the telephoto end narrows that view to about 7.6 degrees. This range lets operators scan a broad scene before zooming toward a specific structure, vehicle, or security event.

The product images show a compact bare module with a large black lens barrel. Silver structural brackets support the assembly, while orange flexible circuits connect its optical and electronic components. Moreover, the rear and sides expose multiple boards, connectors, and component interfaces. Integrators should therefore install the unit inside a suitable UAV, gimbal, industrial camera, or protective housing.

Technical drawings provide useful mechanical references for system design. Specifically, the illustrated assembly is approximately 61.5mm long, 42.4mm across its overall front width, and 55.6mm high. The front body width is shown as 41.1mm. In addition, the lens projection is marked at 32.0mm, while the lens-center reference height is 32.7mm.

The mounting pattern uses four M2 threaded holes with a stated depth of 2mm. Notably, the diagram also identifies 28.0mm and 16.8mm mounting-hole spacing references. Additional references include 12.9mm and 16.0mm measurements. Therefore, engineers should confirm every drawing dimension against the intended bracket or gimbal before manufacturing an interface.

The 10X optical zoom camera supports an electronic shutter from 1/25 to 1/100,000 second. It also provides 3D noise reduction and backlight compensation. Consequently, the module can respond to bright backgrounds, moving scenes, and low-light image noise more effectively. Three-stream technology further allows different video profiles to serve monitoring, recording, and lower-bandwidth connections.

In addition, integrated 1T intelligent calculation supports deep algorithm learning functions. The system includes motion detection, 255 preset positions, and eight patrol patterns. These functions can streamline repeatable observation workflows when the surrounding platform supports the required camera control.

For UAV surveillance, the D-C4110UV UAV camera module offers a useful balance of resolution, zoom reach, and payload weight. For instance, operators can begin with a wide overview and then inspect a selected area. The 256GB storage capacity also supports local recording when network availability becomes limited.

• Aerial observation: Capture broad views and zoom toward distant subjects during UAV missions.
• Industrial inspection: Examine infrastructure and equipment while maintaining a safer operating distance.
• Perimeter security: Combine motion detection with low-light imaging for sensitive monitoring zones.
• Smart-city systems: Integrate compatible network streams into urban event-monitoring platforms.
• Custom camera designs: Install the module inside small dome, bullet, UAV, or gimbal assemblies.

Finally, the module is best suited to integrators who can provide power, networking, control, stabilization, and environmental protection. Its exposed construction allows flexible installation. However, it is not presented as a finished weatherproof camera. Careful mechanical planning will therefore help the 10X optical zoom camera deliver reliable results in its intended system.