D-F760 Stack F722 Flight Controller with 60A 4-in-1 ESC for FPV Freestyle Drones

0 Stack 3540℃
D-F760 Stack F722 Flight Controller with 4-in-1 ESC

D-F760 Stack F722 Flight Controller with 60A 4-in-1 ESC

Compact 30×30mm Power Stack for Aggressive FPV Freestyle Maneuvers

High-Performance Power Solution

The D-F760 Stack combines a state-of-the-art F722 Flight Controller with a high-performance 3060BL32 60A 4-in-1 ESC on a compact 30×30mm footprint, making it an ideal power solution for any FPV Drone aimed at aggressive Freestyle maneuvers.

Processor
STM32F22RET6
Gyro
BMI270 / MPU6000
Barometer
BMP280 / DPS310
ESC Rating
60A Continuous
Battery Support
3-6S LiPo
BlackBox
16MB

Key Features

  • Integrated OSD — Monitor battery voltage, current draw, and motor temperatures in real-time
  • Dual BEC Outputs — 5V/2.5A and 9V/3A for powering VTX and accessories
  • Type-C USB — Simplified firmware updates and configuration
  • Pre-loaded Firmware — AOCODAF7DUAL for FC and BL32_4IN1_60A for ESC
  • Wide Protocol Support — OneShot, Multishot, Proshot, and PWM
  • Compact & Lightweight — FC: 8.8g | ESC: 13.8g
  • Pre-soldered — XT60A power cable and Ruby capacitor included

Performance and Integration

When it comes to real-world flight, the D-F760 pairing delivers razor-sharp handling and a punchy power band that satisfy demanding pilots. The ESC’s 60A continuous rating per motor, paired with the FC’s fast loop rates, ensures that throttle changes are translated instantly, giving the quad a lively feel in tight corners and during split-second acro moves.

Built-in Telemetry

Current sensing and ESC telemetry feed live data back to the OSD, eliminating the need for additional sensors.

Clean Power Rails

The 5V and 9V BEC rails provide stable power for video transmitters and accessories.

Easy Updates

Firmware updates via Type-C port using Betaflight or EdgeTX configurators.

Installation and Build Tips

1

Mount the Stack

Use the 30.5mm mounting pattern with included M3 shock absorbers. Avoid over-tightening to prevent PCB stress.

2

Connect Components

Wire motors following standard layout (verify correct rotation direction). Use provided SH1.0 cables to link FC and ESC.

3

Power Setup

Connect the pre-soldered XT60A connector. Place the Ruby capacitor near the battery input to smooth voltage spikes.

4

Flash & Configure

Update firmware via Type-C using Betaflight. Calibrate ESCs, set OSD layout, and run motor tests to verify direction.

5

Tune & Fly

Perform PID loop tuning in Betaflight to match your flying style. Recommended: 5-inch props with 4S or 6S LiPo.

Technical Specifications

Flight Controller STM32F22RET6 Processor
Gyroscope BMI270 / MPU6000
Barometer BMP280 / DPS310
ESC Rating 60A Continuous / 70A Burst per motor
Battery Input 3-6S LiPo
Mounting Pattern 30.5mm
FC Weight 8.8g
ESC Weight 13.8g
BEC Outputs 5V/2.5A and 9V/3A
BlackBox 16MB

Get in Touch

🌐 Website

https://uavauto.com

🛒 Product Link

View Product

📱 WhatsApp

+86 13602546081 (Mr. Wang)

✉️ Email

kuiwong@hkdada.com

Origin: uavauto.com
View Out Product:

Related Posts

Go to Top